Autonics AT8PMN Power OFF Delay Analog Timers

Autonics W48×H48mm Power OFF Delay Analog Timer – AT8PMN

8-pin plug, 0.05 to 10 min Time setting range, Relay

Autonics AT8PMN timer is an 8-pin socket type timer with an analog type dial for easy adjustments.

Universal power supply of 200-240 VAC ~ 50/60 Hz in AT8PMN timer allows for flexibility in product use. A power on and output status LED easily verifies proper mode function.

This Timer provides:

• Time setting operation method

• POWER OFF DELAY output operation

• POWER OFF START time operation

• 8-pin plug Terminal

• 200-240 VAC ~ 50/60 Hz power supply

• Time-limit SPDT (1c): 2 Control output

• Setting range: 0.05 to 0.5 sec, 0.1 to 1 sec, 0.5 to 5 sec, 1 to 10 sec

• Simple time setup and direct read of time range

Output Operation

The operating mode determines the output method that is used when the set time has reached. The AT8PMN has one output operating modes available:

• POWER OFF DELAY: Power Off delay timer is a timer that gets turned off or changes its contact after a preset time. Off Delay implies Delayed Off.

Time operation

Time operation of AT8PMN is “POWER OFF START” type. That means the time clocking off when voltage is applied to the timer power supply section.

Setting range

The AT8PMN has 4 types of time ranges, 0.05 to 0.5 sec, 0.1 to 1 sec, 0.5 to 5 sec, 1 to 10 sec.

Terminal

The terminal of this product is an 8-pin plug.

Control output

The AT8PMN has “relay” control output. it has 1 contacts which is Time-limit SPDT (1c): 2 depending on output operation mode.

Error

Different types of errors are specified for AT8PMN timer:

• Repeat: ≤ ± 0.2% ± 10 ms

• SET: ≤ ± 5% ± 50 ms

• Voltage: ≤ ± 0.5

• Temp.: ≤ ± 2%